Tintvent Thermal Double Side Tapes,25Mx40mm,Heat Sink Tape,Thermal Adhesive Tape,Thermal Conductive Tape for LED Light,Heat Sink,Computer CPU, GPU Cooler,PC and More, Electrically Insulated

, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets
Specification:
Dimension: 40mm x 25m 
Thickness: 0.2mm 
Reinforcement Provider : Fiberglass Mesh 
Thermal Conductivity:1.5 W/m-k 
Breakdown Voltage: 4KVAC 
Thermal impedance : 0.3℃in2/w 
Preliminary Adhesion: 1.3kg/inch 
180°Adhesion energy: >15 N/25mm 
Warmth Resistance: 120°C (very long time), 180°C ( brief time) 
Relevant temperature vary:-20~+120 °C

Notes For Consideration:
1.When utilizing thermal conductive double-sided tape, preserve the adhesive floor clear and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed together with your fingers (just a bit power).
3.The viscosity of the heat-conductive double-sided adhesive tape have preliminary viscosity and protracted viscosity, and at room temperature, it takes 72 hours to realize the utmost adhesive power,That’s, firstly of the sticky adhesive that’s the preliminary viscosity to 40% of its most viscosity, persistent stickiness is secure over time.
4.Within the paste course of, the suitable heating (60 ~ 70 ℃), will enormously contribute to the efficient enhance within the space of adhesive, and as quickly as attainable to realize most adhesion,Within the decrease temperature of the winter, it is little ideas that heating to extend the viscosity of the heat-conductive double-sided tape when utilizing the thermal conductive tape.

Bundle included:
1 Roll Thermal Conductive Double-sided Tape Specification:
Dimension: 30mm x 25m 
Thickness: 0.2mm 
Reinforcement Provider : Fiberglass Mesh 
Thermal Conductivity:1.5 W/m-k 
Breakdown Voltage: 4KVAC 
Thermal impedance : 0.3℃in2/w 
Preliminary Adhesion: 1.3kg/inch 
180°Adhesion energy: >15 N/25mm 
Warmth Resistance: 120°C (very long time), 180°C ( brief time) 
Relevant temperature vary:-20~+120 °C

Notes For Consideration:
1.When utilizing thermal conductive double-sided tape, kee

Simple to Use:Thermal adhesive Tape is an easy and sensible warmth conductive tape, very simple to make use of, simple to eradicate.
Characteristic:Thermal Conductive Tape Made from Glass material, PSA, PE ,30mmx25Meters 0.2mm Glass Fiber Thickness, Thermal tape with the high thermal conductivity, insulation, robust stickiness, softness, compression.It’s typically used on warmth sinks-Excessive tensile power and powerful adhesion maintain the machine firmly in place, to realize the best thermal dissipation.
Thermal tape has thermal conductivity 1.5 W/m-k to satisfy most of electronics warmth dissipation calls for.
Extensively used for high energy LED,Excessive energy energy provide, Pc CUP, GPU, automotive digital heating module, motor controller, communication gear, energy semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Reminiscence Modules, SSD drives, new vitality heating energy.
Thermal tape warmth conductivity is high and secure,extra apparent than the final warmth dissipation sticker, which enormously improves the lifetime of the part, and is the primary alternative for some high-end digital merchandise that require warmth conduction.
Worth: $18.55
(as of May 30,2020 21:55:09 UTC – Particulars)

, DigitalUpBeat - Your one step shop for all your  tech gifts and gadgets




Leave a Comment