Car Phone Mount, Vent Cell Phone Holder, 3-Level Adjustable Car Mount, Upgrade Air Vent Phone Holder Clamp Arm, Mobile Phone Mount Compatible iPhone 11 Pro MAX/XS MAX/XR/XS/X/8/7/6 Plus etc


The position of the automotive telephone Holder is especially to supply a service for the cell phone. By fixing the cell phone to the automotive telephone Holder, you should use cell phone navigation, video and voice calls, and so on. 1. Improve the automotive mount arm, change the curved clamp arm to the oblong clamp arm, change the middle of gravity of the clamp arm, and higher maintain The cell phone 2. The automotive telephone mount is appropriate with telephones as much as 6. Eight inches, together with iPhone 11 Professional Max, XS Max, XR, X, 8/7/6 Plus; Samsung Galaxy S10, S9, S8, Be aware 9/8/7 and extra 3. Improve the clip of the automotive telephone mount, The three-level adjustable clip is straightforward to put in and disassemble, The clamping drive is stronger, and it may be higher fastened within the vent 4. Ball joint design, you’ll be able to rotate 360 levels by means of the ball joint till the comfy angle of view 5. Now we have reserved sufficient house for the charging cable between the 2 automotive telephone mount ft to make sure that the telephone may be charged usually. 6. On the floor of the product, The within of the clamp arm and the automotive telephone mount foot are connected with a sponge pad and a silicone pad to scale back the friction of the cell phone and the mount, and shield the cell phone.

Higher Stability: The air vent clip is designed to make use of gear adjustment, stage 1: 2. 5-3. 5mm; level2: 1. 8-2. 5mm; stage 3: inside 1. 8mm, This design can make sure that the automotive telephone holder is stably stored on the air vent and won’t shake throughout driving.
Maintain the Telephone Tightly: The 2 expandable clamp arms and the stand ft type a triangle construction to securely repair your telephone. To forestall your telephone from being worn by the mount, we have now added a sponge pad and a silicone pad contained in the telephone holder.
Rotatable Automotive Telephone Mount: we join the bottom and the mount by means of a ball head, and use a nut to repair the connection, so you’ll be able to rotate it in a three-dimensional house, corresponding to turning the telephone inward to regulate it to higher watch the telephone display
One-Button Launch Button: Now we have designed a one-button launch button on the again of the mount, which lets you simply open the clamp arm. If you shut the clamp arm, you’ll be able to simply squeeze the clamp arm together with your hand.
Set up suggestion: because of the traits of the vent, the load of the telephone might trigger the stand to tilt downwards, you’ll be able to insert the bottom into the uppermost vent slot, so the automotive telephone holder is not going to tilt down. In case you additionally produce other strategies, we welcome your ideas.
Value: $9.99 - $8.99
(as of May 21,2020 16:16:42 UTC – Particulars)






Leave a Comment